How to Get Locked Keys Out of Car

If you've ever found yourself in an instance where you've locked your keys inside your car there are a few things that you can use to get them out. These solutions won't solve your issue right away but they will help allow you to get back on the road.

Shoestring

It can be frustrating to lose your keys in your car. There are several DIY strategies you can try to remove your keys from your car.

One of the most popular methods of unlocking a vehicle is to use a shoelace. Although it's a straightforward and effective method, it won't work for every lock on the car. A string that is strong enough to fit between the car's door and the frame will be required.

First, take the shoelace from one of your shoes. Create a slip knot in the middle of the shoelace approximately five inches away from its end. Then you should wrap the shoelace around the window and door frame, keeping it at the middle. Then, you can wiggle the shoelace down into the car and then pull it up toward the door's locking mechanism.

Attach a loop that is the size of your index finger at the end of the string, then use a reverse motion to get it into the upper left corner of your driver's window. This method is most suitable for locks that pop-up. These locks can be found near the door.

Another method that is popular is to use a wire coat hooker. Untwist it and mold it into a hook which you can then maneuver around the lock. Once you've got it centered close to the lock and you are able to pull it up to unlock the door.

This method is less complicated than other methods but it won't always work and could damage your car's paint. However, it's a simple and Locked Keys Out of Car simple method of getting locked keys out of your car when you can't afford to get professional help.

If you're not sure how to utilize this method, you can watch the video below to learn on how to use it. While it's not a good idea for the faint-hearted, if you have patience and are willing to work hard, you can probably be able to complete the task.

Coat Hanger

There's an easy way to get out of your car if you are locked inside. You will need a coat hanger, pliers and a pair of scissors.

You must be able unlock the door by sliding your coat hanger between the window and weather stripping. This leaves a gap in order that you can raise the control arm in the car's door.

The most important thing is to ensure that the hook of your coat hanger shaped in an "V" shape in order to hold the lock handle. Be careful not to bend it too much as you could damage the mechanism of the lock in your car.

After you bend the hook of your coat hanger in a "V" then you should be able slide it through the weather stripping and the window. This will leave an area of about 3 centimeters in the area of the window and the car door.

Once you've got the hanger down between the window and the weather stripping and you're ready to start looking for the control arm. Although it's not easy, once you are positioned correctly, you should be able find the control arm.

Don't lose heart if you cannot locate the arm that controls the device. You can still push the button at the end of your coat hanger. It's just a matter of being very patient and work at it.

Another option is to thread your hanger through the window crack. It might take a few times before it gets the hanger to work but eventually, it will.

In addition to using a coat hanger to unlock your car there are numerous other uses for them. For instance, some women have attempted to abort their children with coat hangers.

This has been shown to be an extremely efficient method of obtaining an unplanned pregnancy in certain countries. However, it is important to be aware that there are risks when you attempt to abort your child using an iron for hanging coats.

Pump Wedge

A Pump Wedge is a handy tool to have in your vehicle for a variety of reasons. One reason is that it helps to unlock keys locked out of your car out of your vehicle. It is also a way to create a gap between the door frame and the door so that access tools or rods can be placed inside the lock.

For a wedge to be used to achieve this first, find something thin that can be put in the space between the door and its frame. This can be a plastic shank, but it's better to find an item made of wood or metal.

Once you've found a suitable wedge, you need to make an opening in the door that will be enough for a probe tool to reach. There are a variety of probe tools that are available but the type you need will depend on the model and maker of your vehicle.

If your vehicle is equipped with weather stripping that is multi-layer, you need to be careful when you place the wedge on the glass. Using too much pressure can cause the lower layer of weather stripping to roll underneath the wedge, tightening the gap between the wedge and the glass.

To prevent this from happening you should be cautiously adjust the wedge's bottom to ensure that it doesn't slide under the weather stripping. Also, ensure that you leave enough space between the wedge and the door.

The final thing you want to avoid is to push down too hard and break your wedge, or worse than that, the door itself! This happens frequently, and it's best to be as safe as you can.

A good rule of thumb is to have a minimum of two inches in diameter between the top corner of the wedge and the bottom of the door's frame. The greater distance between the frame and the wedge the more easy it will be to maneuver your tool without damaging the door's trim or other trim.

A professional can assist you determine whether you can make use of a wedge to unlock your car's keys. They can give you a more accurate estimation of the size and strength of the gap between the wedge and the door frame, as well as the tools that can be used to insert it.

Screwdriver

A screwdriver is a fantastic method to unlock your car. It may seem like a bizarre way to unlock your car, but many people have successfully used this tool to unlock keys that were locked out of their vehicles.

This method is only applicable to pop-up locks, therefore you must be careful when attempting it. It is important not to push the mechanism of the lock too hard and avoid putting your screwdriver in too deep the door.

First, place your screwdriver into the keyhole. Make sure it has an elongated head. Once it's in position move it in a clockwise direction until you hear the click.

To help the screwdriver slide in better, add a bit of sandpaper on it to increase its grip. You can replace sandpaper with a bobby pin, paperclip or another similar materials if have enough sandpaper.

The next step is to use an rake to clean the pins of the lock. To do this, place the rake over your screwdriver and scrub it in the direction that the pins are. This allows you to scrub them and then set them so that the lock can be opened.

It may take a bit of practice, but you'll get the grasp of it quickly. Once you've mastered this method, you can apply it to other locks.

It is not necessary to make use of a screwdriver if are not comfortable using one. A steel rod can be used to unlock the keys to your car. You'll require a thick and long rod, but you could also make use of any long and sturdy pole-type tool that you have lying around.

After the rod has been inserted, you can pull the handle inward or push the unlock button to unlock the door. This is a quick and quick method of getting your keys from your car however, be aware that it may cause damage to your door's interior and exterior.

You can also try pairing your mobile device to your car's key to unlock it remotely. There are apps for Android and iOS available that can make your phone another key, based on the make and model. These apps are useful for those who have lost their keys or don't have them on your phone at the moment.