How to Get Keys Out of a Locked Car

It's easy to lose your keys or get in a hurry and lock your car keys. You should always have a few alternatives in your bag.

For instance, a coat hanger can be used to control the door latch in order to unlock your vehicle. You can also use an extended, flexible plastic strip.

Push the Unlock Button

It can be a major pain when you return to your car only to find that your keys are locked inside. There are some ways to get your keys out of your vehicle without having to call for professional assistance.

First, make sure you verify that all doors are locked. If you suspect that one door is not locked, attempt to open it, and then look for the key in there.

If you're unable open any doors, you might need to push the Unlock Button on either the driver's or passenger's sides. However, it's important remember that doing so is dangerous. It could cause damage to the lock or cause damage to the door.

To push the Unlock Button, you need to create a small gap between the door of your car and its frame. You can do this by sliding a wire coat hanger or rod through the gap.

An inflatable wedge can also be found at a variety of automotive and hardware stores. It's an auto entry tool that will increase the opening of a door to give you more room to put in your wire coat hanger or rod, and then press the unlock button.

Another alternative is to use long plastic straps. The strap can be slipped through your door until it reaches its lock.

Pull the strip to unlock your car's doors. This method may be more effective if your vehicle comes with a pull-up lock.

If the plastic strip is not fit, you could try a thin piece of wood or Get Keys Out Of Locked Car metal. Be sure that the piece fits between the top of the side door window of your car and the door frame.

Once you have found the right size and shape for the tool, place it into the appropriate space. It could take a while to find the perfect place on the door to place your wire coat hanger/rod.

You might ask someone to give you a spare key in case you're unable to unlock your vehicle. This will help you save time and ease the stress.

Pull the Interior Door Lever

You may have to try various options before you are able to remove the keys from your door, if you're unable to make use of the key. These options are largely dependent on the kind of lock your vehicle is equipped with and the tools you have available.

One option is to use a shoelace and push the button that unlocks the car. While this method has worked in the past, it's not guaranteed to work on your specific vehicle.

Another option is to use a rod or a coat hanger. While it's not a guaranteed fix however, it can be used on older cars with manual locks. Bill Evans, manager at J&E Auto Body Clark, N.J., suggests this method.

A rod of metal with slight bend or thin, threaded rod is required. The rod should be strong enough to withstand pressure but flexible enough that it can be bent manually.

When the rod or hanger is bent, place it between the car's door and the rest. To unlock your car from the interior, you can insert it into the lock.

Next you'll need to insert the flathead screwdriver (or a small Allen wrench) into the hole in the lever handle. This will push down the detent pin which releases it. If it doesn't release quickly, you should look for an additional detent on the side of the lever handle.

If you've noticed that the knob isn't working on its own, you may need to remove a set screw that is located on the interior side of the lock. The screw is usually hidden behind a decorative plate called rose.

If the knob doesn't move, you may have to take it to an hardware store and replace it with an entirely new knob. You can also consult the owner's manual of your vehicle for more details on how to select the right door knob lever handle.

Once you have done this, you'll be able to unlock the door using your keys. If you're not able to open the door, you'll have to call a locksmith. This is not the best option since it could put at risk your car and cost you some extra.

Try to hook the keys

It can be very frustrating to be locked out of your car, particularly if you're in rush or depend on it as your primary mode for travel. There are many ways to get back on the road and you don't even have to call an expert.

One of the most sought-after alternatives is to use a clothes hanger to unlock the door. Simply twist the hanger in order to create a hook. Next, slide the hanger across the window of the car until it is at two inches below the glass near the handle.

Another option is to put an elastic loop at the end of string. Then, you have to slide the string in and out of the window at the most appropriate moment to ensure that the lock is in the right spot.

While the shoestring trick is certainly an effective idea, it will not have much effect when your car locks are old-fashioned. On the other hand it could be the best option for you when your car is equipped with horizontal locks and you're in a pinch to save time or money. This method involves finding the right size hanger. Remember that a good hook is three times longer than straight lines. It's also important to ensure that you don't get Keys out of locked car your shoelace stuck in the door or handle, so take care when using this method. This method is not only laborious, but it could cause serious damage to your vehicle if a mistake is performed.

Try to Roll Down the Window

If you can't seem to unlock your keys from a locked car and you're stuck, you may need to try some drastic methods. Many have tried smashing windows to retrieve their keys, but this could be dangerous if the window is broken and there are occupants in the car.

If your window isn't rolling up or down, you could be experiencing a problem with the motor of the power window. This is a pretty common problem that is easy to fix by knowing where to look.

First find the motor for the power window on the car's door panel. It's usually located near the lower portion of your panel.

Then you can use your fist (or any blunt object) to hit the motor with your fist. This could cause the motor to shake loose, and the window will start rolling again.

Once you've gotten the window back up you can test it by pressing the switch, then opening and closing the door several times. If it does it will be clear that the motor isn't the problem.

Another alternative is to raise the window manually. This will require some trial and error to ensure you have the right pressure. It is a great option in certain situations.

In certain cases you may be able to raise your window manually using a coat hanger made of wire. You'll require pliers and a modified steel coat hanger (which are available in a majority of hardware stores).

Before trying to lift your window using this method, you must to make sure the lock on the door isn't broken. This can prevent you from getting your hands stuck in the window when it closes and could also damage the lock.

If you're unable to find the problem or if there's people inside the vehicle, roll the window up and contact a professional locksmith. A professional locksmith will have the right tools and knowledge to assist you without causing any damage to your vehicle or causing any further damage.